top of page

RF-191 Metallic Loft

Pearl-like Metallic Finish Decorative Solution

1. Surfaces must be clean, dry, structurally sound and free from other materials that will have effect on adhesion.

2. Apply 1 coat of RHINOZ Primer Bonding, then leave it dry for 15-30 minutes.

3. Skim 1 coat of RHINOZ Bond Skim on the desired area, then leave it dry for 1-2 hours.

4. Skim the 1st coat of RHINOZ Metallic Loft with trowel in a thin layer while adding thickness in some area to create pattern for the illusion of depth and texture. Leave it dry for about 1 hour.

5. Apply the 2nd coat of RHINOZ Metallic Loft with trowel on to the whole area. Leave it for 10-20 minutes.

6. Use trowel to touch up, polish, and smoothen the finish, and leave it dry completely for 4-6 hours.

7. Sandpaper can be used for a smoother finish, wipe off the dust and chalk.

Project Gallery

bottom of page